The Perfit Ace adjusts to ANY adult-size neck with 16 settings ranging from neckless to tall. Stores completely flat. Horizontal sizing line. Radiolucent, CT & MRI compatible. Safety buttons for maximum reliability.
The Arachnipod is the world’s most versatile modular total edge management system (TEMS) and was recently awarded an Australian International Design Mark at the 2008 Design Awards. The Arachnipod is based on the concept of an industrial tripod. However, this product is much more than just a tripod. Components can be added or removed as required so that the Arachnipod complements existing structural or natural features. The unique design of the patent-pending modular head means the Arachnipod can be constructed into many different configurations, including a gin pole/monopole, bipod, tripod, quadpod, bridge system, and handrail recovery monopole. For heavy loads, an infinite number of additional legs can be fitted to increase the safe working load (SWL). Its versatility makes it an ideal system for workers in rescue and emergency services, construction, military, utility services, mining, film, and maintenance. Meets CE EN 795B standard for Tripod and Quadpod.
How It Works The Arachnipod, in its most basic form, is a simple tripod with three legs independently pivoting from an anodized aluminum head. The modular head has a similar design to a door hinge. Inserting or removing a pin through the center of the head allows the quick and simple addition or removal of components to create a configuration to suit any edge management scenario. Each head section contains a shackle.
The Arachnipod Advantage PLUS includes the basic Advantage Tripod system (Pulley Head and one swiveling rigging point) and adds a Gin Head, Rigging Plate, Quad Plate, and Reverse Head. A Quadpod system can be created by adding the appropriate Quadpod Add-On Kit to the base system. Weight: 60 lbs.
Systems that can be built from the Advantage-Basic
The APOD Accessory kit contains many needed options to use with the Arachnipod. Included are steps that allow the user to reach the top of the tripod after set-up. Spike feet for rough terrain. A rigging Equipment Bracket for control devices or auxiliary pulleys. Rigging Plates for stabilization. And much more Weight: 41.15 lbs.
Contents
1 Full Accessory Kit Bag
4 Spike Feet, Each
1 Gin Head
4 Soft Ground Shoes, Each
4 Hold-Down Stakes
8 M12 Tru-Bolts
2 M12 Masonry Drill Bit
2 Spare Quik-Link Head Pins
2 Spare Detent Pins
1 Spare Leg Pin with Detent Pin
2 Steps
1 Equipment Bracket
1 Rigging Plate
1 Quad Head Plate
The Newest Single Unit Edge Guard
Excellent stainless steel edge guard gives the needed abrasion protection from sharp edges. Minimum entry size: 18″ (45 cm). Works for confined spaces with limited overhead rigging availability. Compatible with stretchers and people over manholes, ladder rungs, railings, pipes, or any surface in which the lifeline may become damaged.
Weight: 5 lbs (2.3kg)
Manufactured with our new Clik-Lock Buckle, this unit is affixed to backboards and stretchers with a girth hitch. Constructed of 1.75″ flat nylon webbing (Tensile Strength: 5,500 lbf.) and Clik-Lok adjuster buckles. We recommend crossing the chest area using different color slings to aid in proper buckle attachment Length: 70″
The Harness Keeper Tabs for the RescueTECH Turnout Escape Seat Harnesses. Designed to keep the harness in place. 2 styles to fit turnout pants: Standard Button style and Loop style (Globe).
Zippered, in Multiple Colors
New style zippered hose/cable protector. 100 ft. long in four colors to allow accurate designation and selection of hose/cable / Lifeline combinations. The Umbilicals can be linked together
Colors: Orange, Black, Yellow, Red, Blue
Materials
A great new product from Junkin. Manufactured from the highest grade PVC. Special design is lightweight and easy to clean. Compatible with Patient Restraint Straps and Triple X Backboard Strap. Floats without load. Color: Yellow
*** Speed Clip Straps part number 620231 are required with backboard with Speed Clip Pins ***
All MACK- Series units start with the MACK-1 basic functions. One or two SCBA cylinders (not included) provide air to the system; a CGA-347 high pressure inlet is also provided to allow continuous operation from truck mounted air cylinders. A low pressure regulator provides 0-125 psi air to a four outlet respirator manifold. A low pressure alarm whistle and a 6 volt DC lamp to illuminate the case interior are provided as standard.
The MACK units have been designed as a series of portable air distribution boxes to meet the most demanding air handling needs of the Fire/Rescue industry. All models have been manufactured to provide emergency low pressure breathing air from either SCBA cylinders or from a bank of large storage cylinders located on Fire Department vehicles. More advanced models offer multiple air pressure regulators for confined space rescue operations, mid-range pressure for rescue tool devices, and high pressure emergency air cylinder filling systems.
Pricing includes 1/2″ Hansen or Schrader fittings (PLEASE SPECIFY).
Other fitting available call for pricing,
Air Distribution System Designed Specifically for Confined Space Rescue Teams
The MACK-NFPA series has been developed specifically for the Fire/Rescue teams working under NFPA guidelines. All MACK- Series units start with the MACK-1 basic functions. One or two SCBA cylinders (not included) provide air to the system; a CGA-347 high-pressure inlet is also provided to allow continuous operation from truck-mounted air cylinders. A low-pressure regulator provides 0-125 psi air to a four outlet respirator manifold. A low-pressure alarm whistle and a 6 volt DC lamp to illuminate the case interior are provided as standard.
The MACK-NFPA3 has two separate regulator/manifold systems. Two SCBA connect whips are provided for each regulator. In the event of a regulator malfunction, rescue can be performed on the standby regulator system. The MACKNFPA3 has a regulator isolation valve added to allow one or both air sources to be used simultaneously.