The Perfit Ace adjusts to ANY adult-size neck with 16 settings ranging from neckless to tall. Stores completely flat. Horizontal sizing line. Radiolucent, CT & MRI compatible. Safety buttons for maximum reliability.
Manufactured with our new Clik-Lock Buckle, this unit is affixed to backboards and stretchers with a girth hitch. Constructed of 1.75″ flat nylon webbing (Tensile Strength: 5,500 lbf.) and Clik-Lok adjuster buckles. We recommend crossing the chest area using different color slings to aid in proper buckle attachment Length: 70″
The Half-Sked is made of the same durable material as the Sked stretcher, but is only half as long. The patient is secured in the Half-Sked with sewn-in two inch webbing straps with fastex style double adjustable buckles, and patients can be extricated from the tightest of confined spaces. Unlike the Sked® stretcher, the Half-Sked allows the patient to bend at the hips, allowing greater flexibility to turn corners. The Half-Sked should not be used as a hoisting or immobilization device, but for cost effective extrication from the most demanding confined spaces there is nothing quite like it anywhere.
Made in USA.
Weight 10 lbs
Dimensions 48 × 36 × .1 in
The Lifesaver Victim Chest Harness™ turns the Lifesaver Victim Harness™ into a full-body evacuation harness for vertical lifts during confined space operations or wherever upper body support is needed. It’s easy to attach to the patient under all conditions, and its padding provides added comfort. Pelvic harness and carabiner sold separately.
Our Lifesaver Victim Harness attaches quickly and securely no matter how or where the victim is positioned. Colored web makes using the harness even easier. Our original Steel Snap-Hook Buckle design allows the harness to be put on without the victim having to step into the harness. The tie-in point also doubles as a handle for controlling the victim’s position. One size fits small children to large adults. The storage bag, attached to the harness so it cannot be lost, prevents tangling when accessing the victim. The harness includes a wider two-inch hook-and-loop Web Keeper to secure web before deployment. Classified to NFPA Standards — Class II Life Safety Harness.
A great new product from Junkin. Manufactured from the highest grade PVC. Special design is lightweight and easy to clean. Compatible with Patient Restraint Straps and Triple X Backboard Strap. Floats without load. Color: Yellow
*** Speed Clip Straps part number 620231 are required with backboard with Speed Clip Pins ***
Choice of the U.S. Army, this spinal immobilization/extrication device is the only device of it’s type that meets all of the established criteria for immobilizing a seated patient. An ideal companion for the Sked® Stretcher System, when properly used the OSS II provides for safe removal of patients from injury sites without doing further damage to the spine. The unique criss-crossing shoulder strap design provides superior immobilization without restricting breathing and, for clavical fractures, can be re-configured to retract and immobilize the shoulders. The OSS II is designed to provide easy access to the patient’s chest or abdominal area for treatment or diagnostic procedures. It can be used in place of a conventional short backboard and as a hip or leg splint. The OSS II includes a shoulder board not found in similar devices, which can be used to prevent compression of the shoulders when using a flexible stretcher.
The OSS II folds into an extremely small package and slips inside a rolled-up Sked® Stretcher in its backpack bag, adding no volume to the Sked Rescue System package. When used with the Sked® Stretcher the OSS II ensures critical spinal rigidity during transport, whether carried or lifted. Available in International Orange or Coyote Brown with matching color carring case.
The SK-300 OREGON SPINE SPLINT II comes with:
Available as a one or two-piece style strap for use with stretchers and backboards. Consisting of two straps with a loop at one end, to girth hitch around stretcher rail, and a connector at the other end. An excellent alternative to the “seat buckle” style connectors. Two-piece buckles manufactured of forged steel and require movement in two planes to detach. Easy to connect and adjust.
The Rectangular Stretcher builds on our popular Tapered Stretcher design. It is designed to be symmetrical from end-to-end and to allow larger sized, rectangular backboards to easily fit inside. Cold Rolled tubing and a full length steel strip backing for strength and rigidity. Rated strength: 1,500 lbf. May be configured with four of the same col
Config.
Dimensions: 84″ x 23.5″ x 7.25″
Interior Depth: 6″
Weight: 37 lbs
Shipping Weight: 43 lbs
Color: Black
Protects Stretcher from Elements
Manufactured from vinyl-coated polyester for extra strength and durability. Double stitched seams and Vislon Zipper. For ease of loading, zippers allow 1/2 of the top of the cover to flap open. Carrying handles and compression straps are included.
Dimensions: 90″ x 30″ x 10″
Weight: 7.5 lbs.